LGA80D Series 非隔离DC-DC电源
The LGA80D is a non-isolated DC-DC converter that is designed for cost and space sensitive applications.
This non-isolated unit offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 mm.
This non-isolated unit offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. With a footprint of 1 x 0.5 inches or 25.4 x 12.5 mm.
型号 :
lga80d-series
The module offers two independent and configurable 40 amp, 100 watt outputs, which can also be combined to a single configurable 80 amp, 200 watt output. You can generate higher current rated rails by connecting up to 4 units in parallel so that up to 320 amps can be supplied as a single power rail.
The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 Vdc at a maximum efficiency of 95.5% by either PMBus or via external resistor configuration.
The LGA80D is a unit that is applied in applications by surface mount technology via its block-pin terminations and can withstand reflow oven temperatures and is supplied in tape-and-reel packaging for simplest production management.
The input voltage and output voltage specifications remain the same in any configuration, so the input is defined as 7.5 V to 14 V and the output voltage can always be adjusted within the range of 0.6 V to 5.2 Vdc at a maximum efficiency of 95.5% by either PMBus or via external resistor configuration.
The LGA80D is a unit that is applied in applications by surface mount technology via its block-pin terminations and can withstand reflow oven temperatures and is supplied in tape-and-reel packaging for simplest production management.
-
Total Max Power:
200 W -
Total Max Current:
80 A -
Input Voltage:
7.5 V to 14 V -
Output Voltage:
0.6 V to 5.2 V -
Outputs:
Dual -
Size (L x W x H):
1.000" x 0.500" x 0.500" -
Warranty:
2 years -
Operating Temperature:
-40 degC to +85 degC
- 200W Point of Load converter
- Dual or single output configuration possible
- High efficiency up to 95.5%
- Small size 1” x 0.5” x 0.48” (LxWxH)
- Supports PMBus
- No minimum load requirement
- Wide operating temperature range
- Exceptional power density
- Excellent transient response
- Analog or digital control
- IPC9592B compliant
- Tape and reel packaging
- Reflow compatible
- Possible to stack up to 8 phases (4 units) for 1 rail of 320 A
- Two year warranty
- Evaluation kit is available
