Monroe 282CPS 静电消除检测仪
• Exceeds current requirements of ESD Assn. SP3.3 for periodic Verification of Air Ionizers
• Performs go/no-go, balance, and decay tests
• Includes dual polarity charger, adapter, and carrying case
• Attaches to Model 282 fieldmeter
The Charge Plate System, model 282CPS is an accessory for the model 282 Fieldmeter that permits the model 282 to measure ionizer performance. The 282CPS includes a charge plate attachment for the fieldmeter and a charging source to charge the plate attachment. The fieldmeter then measures the plate voltage during balance and decay tests.
Model 96138 Plate Assembly
Plate Capacitance:
13 picofarads ± 2 picofarads
Range:
0 to ± 2 kV
Grounding:
Connection through conductivecase of Model 282 fieldmeter
Weight:
1.5 oz
Model 280-1 Charger
Output:
1100 VDC nominal, <1µA max
Output terminals:
Two acorn buttons labeled for “+” and “-”. To select, ground opposite terminal.
Battery:
9-volt Eveready #216 or equivalent, NEDA #1604
Battery life:
40 hours
Temp. Range:
0° to +30° C (+50° to +80° F)
Relative humidity:
0% to 80% non-condensing
Dimensions:
75x2.88x1inch (9.53x7.32x2.54 cm)
Weight:
8oz (79 gm)
- Lowest-cost test method for periodic verification of ionizers
- Correlates closely to charged-plate monitor test results
- Performs both positive and negative decay tests
- Also works with Model 281
