Monroe 287B 静电消除检测仪
• All-in-One Instrument-Measures, displays and stores voltage, decay time, temperature and humidity
• Exceeds current requirements of ANSI/ESD SP3.3 for Periodic Verification of Air Ionizers
• Test Balance and Decay
• Low Cost / Performance Ratio
• Hand-held, Battery Operated
• Microprocessor Driven
• Built -in Self Test
• Exclusive Monroe Electronics Two-year Warranty
• Exceeds current requirements of ANSI/ESD SP3.3 for Periodic Verification of Air Ionizers
• Test Balance and Decay
• Low Cost / Performance Ratio
• Hand-held, Battery Operated
• Microprocessor Driven
• Built -in Self Test
• Exclusive Monroe Electronics Two-year Warranty
型号 :
Monroe 287B
The model 287B is a low-cost and highly portable alternative to a charged-plate monitor for periodic verification of ionzer performance. It permits ionizer testing at the work location without the need to remove the ionizer from service for testing.
|
Charger: |
±1100volts, selectable polarity |
|
Fieldmeter: |
|
|
Measurement Range: |
±1250V, 1V resolution |
|
Accuracy: |
±5% of reading, ±2% typical |
|
Zero Drift: |
<±4V in 90s, ±2V typical |
|
Trip Points: |
Fixed 1000V and 100V |
|
Charge Plate: |
1.7in x 4in; (43mm x 102mm) |
|
Capacitance: |
»25pf |
|
Self-discharge: |
<10% of full scale in 200s |
|
Display: |
2.4” x 0.63”, 2 x 16 LCD |
|
Timer: |
200.0s maximum, 0.1s resolution |
|
Sensors: |
20-80% ±3% of reading |
|
Humidity |
|
|
Temperature: |
±1°C typical |
|
Oper. Temp.: |
25°C, ±10°C |
|
Battery: |
9 volt NEDA #1604A or equivalent al- kaline (>40 hour life or >1300 charge cycles). Longer life may be achieved by using 9-volt lithium. |
|
Dimensions: |
8.1x4x1.9 inches (206 x 102 x 48 mm) |
|
Weight: |
1lb., 6oz. (0.63kg) |
- Manual or automated tests
- Optional 6-inch plate attachment (Model 287/22C) achieves 1:1 correspondence with standard charged-plate monitor test results
- Saves the test results for ten manual tests or ten automated test sequences including environmental data
- Integral temperature and relative humidity sensors to capture environmental data during test
- Test results correlate to standard tests performed using a charged-plate monitor in accordance with ESD Association standard S3.1
- Intergrates decay timer lacking in ionizer test kits for fieldmeters
